If you made any changes in Pure these will be visible here soon.

Research Output 2012 2019

  • 22 Article
  • 4 Conference contribution with ISSN or ISBN
  • 1 Conference article
2019

Analytical modeling of temperature distribution in lead-screw whirling milling considering the transient un-deformed chip geometry

He, Y., Liu, C., Wang, Y., Li, Y., Wang, S., Wang, L. & Wang, Y., 6 May 2019, In : International Journal of Mechanical Sciences. 157-158, p. 619-632 14 p.

Research output: Contribution to journalArticle

Lead screws
Milling (machining)
screws
Temperature distribution
temperature distribution

An analytical model for predicting specific cutting energy in whirling milling process

He, Y., Wang, L., Wang, Y., Li, Y., Wang, S., Wang, Y. & Liu, C., 28 Aug 2019, In : Journal of Cleaner Production. 240, 118181.

Research output: Contribution to journalArticle

Milling (machining)
Analytical models
Machining
Ball screws
Sustainable development

Environmental life cycle assessment of remanufactured engines with advanced restoring technologies

Zheng, H., Li, E., Wang, Y., Shi, P., Xu, B. & Yang, S., 24 Apr 2019, In : Robotics and Computer-Integrated Manufacturing. 59, p. 213-221 9 p.

Research output: Contribution to journalArticle

Life Cycle Assessment
Remanufacturing
Life cycle
Engine
Engines

Low-carbon product conceptual design from the perspectives of technical system and human use

Ai, X., Jiang, Z., Zhang, H. & Wang, Y., 11 Oct 2019, In : Journal of Cleaner Production. 118819.

Research output: Contribution to journalArticle

Conceptual design
Product design
Carbon
Dispensers
Carbon footprint

Modeling and optimization of dynamic performances of large-scale lead screws whirl milling with multi-point variable constraints

Wang, Y., Chen, Y., Li, L., Zha, W., Pu, X. & Wang, Y., 10 Sep 2019, In : Journal of Materials Processing Technology. 276, 116392.

Research output: Contribution to journalArticle

Lead screws
Milling (machining)
Dynamic models
Machining
Dynamic response

基于目标级联的废旧机械装备多目标优化再设计方法研究

Translated title of the contribution: Research on Multi-objective Optimization Redesign Method for Used Mechanical Equipment Based on Analytical Target CascadingWang, H., Jiang, Z., Zhang, H. & Wang, Y., 5 Feb 2019, In : Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. 55, 3, p. 147-153 7 p.

Research output: Contribution to journalArticle

Open Access
Multiobjective optimization
Multi-objective Optimization
Remanufacturing
Target
Energy Consumption
2018

A Big Data based Cost Prediction Method for Remanufacturing End-of-Life Products

Ding, Z., Jiang, Z., Liu, Y., Wang, Y. & Li, C., 27 Jun 2018, In : Procedia CIRP. 72, p. 1362-1367 6 p.

Research output: Contribution to journalConference article

Open Access
File
Costs
Backpropagation
Particle swarm optimization (PSO)
Data mining
Big data

A configurable on-line monitoring system towards energy consumption of machine tools

Wu, P., He, Y., Lim, M. K., Wang, Y., Wang, Y. & Hu, L., 5 Sep 2018, Advances in Green Energy Systems and Smart Grid: First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Proceedings. Li, K., Zhang, J., Chen, M., Yang, Z. & Niu, Q. (eds.). Singapore: Springer-Verlag, p. 139-150 12 p. (Communications in Computer and Information Science; vol. 925).

Research output: Chapter in Book/Conference proceeding with ISSN or ISBNConference contribution with ISSN or ISBN

Machine Tool
Monitoring System
Machine tools
Energy Consumption
Energy utilization

A Demands-Matching Multi-Criteria Decision-Making Method for Reverse Logistics

Wang, H., Jiang, Z., Wang, Y., Liu, Y., Li, F., Yan, W. & Zhang, H., 27 Jun 2018, In : Procedia CIRP. 72, p. 1398-1403 6 p.

Research output: Contribution to journalArticle

Open Access
File
Analytic hierarchy process
Logistics
Entropy
Decision making
Service life

An integrated MCDM approach considering demands-matching for reverse logistics

Wang, H., Jiang, Z., Zhang, H., Wang, Y., Yang, Y. & Li, Y., 11 Oct 2018, In : Journal of Cleaner Production. 208, p. 199-210 12 p.

Research output: Contribution to journalArticle

Open Access
File
Logistics
logistics
Decision making
decision making
Analytic hierarchy process

A two-stage optimization method for energy-saving flexible job-shop scheduling based on energy dynamic characterization

Wang, H., Jiang, Z., Wang, Y., Zhang, H. & Wang, Y., 27 Mar 2018, In : Journal of Cleaner Production. 188, p. 575-588 14 p.

Research output: Contribution to journalArticle

Energy conservation
Scheduling
manufacturing
energy
genetic algorithm

Study of Heat Source Calibration and Modelling for Laser Welding Process

Chen, C., Lin, Y. J., Ou, H. & Wang, Y., 14 Aug 2018, In : International Journal of Precision Engineering and Manufacturing. 19, 8, p. 1239-1244 6 p.

Research output: Contribution to journalArticle

Laser beam welding
Calibration
Welding
Exponential functions
Hot Temperature
2017

A fault feature characterization based method for remanufacturing process planning optimization

Wang, H., Zhigang, J., Zhang, X., Wang, Y. & Wang, Y., 28 May 2017, In : Journal of Cleaner Production. 161, p. 708-719 12 p.

Research output: Contribution to journalArticle

Process planning
Worm gears
Fault tree analysis
Raw materials
Energy utilization

A New Lightweight Design Method Integrating Shape Optimization with Life Cycle Assessment for Extrusion Dies

He, Y., Huang, T., Wang, Y., Nei, Y., Li, Y. & Wang, Y., 27 Feb 2017, In : Journal of Cleaner Production. 150, p. 47-57 11 p.

Research output: Contribution to journalArticle

design method
extrusion
environmental impact
life cycle
plastic
2016

A hybrid approach of rough set and case-based reasoning to remanufacturing process planning

Jiang, Z., Jiang, Y., Wang, Y., Zhang, H., Cao, H. & Tian, G., 1 Jun 2016, In : Journal of Intelligent Manufacturing. p. 1-14 14 p.

Research output: Contribution to journalArticle

Case based reasoning
Process planning
Acoustic waves
Studios
Hybrid systems

Energy-based approach to thermal fatigue life of tool steels for die casting dies

Chen, C., Wang, Y., Ou, H. & Lin, Y. J., 23 Jun 2016, In : International Journal of Fatigue. 92, p. 166-178 13 p.

Research output: Contribution to journalArticle

Thermal fatigue
Die casting
Tool steel
Fatigue Life
Casting

Reliability and cost optimization for remanufacturing process planning

Jiang, Z., Zhou, T., Zhang, H., Wang, Y., Cao, H. & Tian, G., 14 Jan 2016, In : Journal of Cleaner Production. 135, p. 1602-1610 9 p.

Research output: Contribution to journalArticle

Process planning
planning process
cost
Costs
environmental legislation
2015

A modeling method for hybrid energy behaviors in flexible machining systems

Li, Y., He, Y., Wang, Y., Wang, Y., Yan, P. & Lin, S., 23 May 2015, In : Energy. 86, p. 164-174 11 p.

Research output: Contribution to journalArticle

Machining
Petri nets
Machine tools
Energy utilization
Flexible manufacturing systems

Design for sustainable behaviour

Sun, X., Wang, Q., Wang, N., So, C. S. & Wang, Y., 1 Jan 2015, Cross-Cultural Design: Methods, Practice and Impact - 7th International Conference, CCD 2015 Held as Part of HCI International 2015, Proceedings. Springer-Verlag, p. 372-380 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9180).

Research output: Chapter in Book/Conference proceeding with ISSN or ISBNConference contribution with ISSN or ISBN

User Behavior
China
Design
Influence

Optimization of machining parameters considering minimum cutting fluid consumption

Zhigang, J., Zhou, F., Zhang, H., Wang, Y. & Sutherland, J. W., 1 Dec 2015, In : Journal of Cleaner Production. 108, p. 183-191 9 p.

Research output: Contribution to journalArticle

Study of weld characteristics for repair using sequential experimental design and artificial neural networks

Chen, C., Wang, Y. & Ou, H., 15 Sep 2015, In : International Journal of Advanced Manufacturing Technology. 84, 5-8, p. 1313-1323 11 p.

Research output: Contribution to journalArticle

Design of experiments
Welds
Repair
Neural networks
Hard facing
2014

A Case-Based Reasoning Method for Remanufacturing Process Planning

Zhou, F., Zhigang, J., Zhang, H. & Wang, Y., 11 Nov 2014, In : Discrete Dynamics in Nature and Society. 2014, p. 1-9 9 p.

Research output: Contribution to journalArticle

Open Access
File

A framework for characterising energy consumption of machining manufacturing systems

Li, Y., He, Y., Wang, Y., Yan, P. & Liu, X., 17 Jan 2014, In : International Journal of Production Research. 52, 2, p. 314-325 12 p.

Research output: Contribution to journalArticle

A review on remanufacture of dies and moulds

Chen, C., Wang, Y., Ou, H., He, Y. & Tang, X., 1 Feb 2014, In : Journal of Cleaner Production. 64, p. 13-23 11 p.

Research output: Contribution to journalArticle

Comparison of thermal fatigue test methods for die casting process: A finite element study

Chen, C. R., Wang, Y. & Ou, H. G., 1 Jan 2014, Materials Engineering and Automatic Control III. Trans Tech Publications Ltd, p. 516-520 5 p. (Applied Mechanics and Materials; vol. 575).

Research output: Chapter in Book/Conference proceeding with ISSN or ISBNConference contribution with ISSN or ISBN

Thermal fatigue
Die casting
Thermal shock
Heating furnaces
Induction heating

The local approximation method for structural optimization

Nie, Y., Wang, Y., Sun, W., He, Y., Hao, J. & Huang, T., 1 Jan 2014, Materials Engineering and Automatic Control III. Trans Tech Publications Ltd, p. 854-858 5 p. (Applied Mechanics and Materials; vol. 575).

Research output: Chapter in Book/Conference proceeding with ISSN or ISBNConference contribution with ISSN or ISBN

Structural optimization
Rails
Shape optimization
2012

Remanufacture of die casting dies

Chen, C., Wang, Y., Ou, H. & Gindya, N., 31 Dec 2012, In : Applied Mechanics and Materials. 121-12, p. 3482-3486 5 p.

Research output: Contribution to journalArticle