Skip to search boxSkip to navigationSkip to main content

Intensified constructed wetlands for the treatment of municipal wastewater: experimental investigation and kinetic modelling

*Corresponding author for this work
Research output:
Contribution to journal
Article
Research
Peer-review

About the research

<p>This study reports organics and nutrient removal performances of the intensified constructed wetlands, i.e., tidal flow-based microbial fuel cell (MFC) and tidal flow wetlands that received municipal wastewater. The wetland systems were filled with organic (coco peat, biochar) or waste (Jhama brick, steel slag) materials, planted with Phragmites australis or Chrysopogon zizanioides (Vetiver) species, and operated under three flood periods: 8, 16, 24 h. Input ammonia nitrogen (NH<sub>3</sub>–N), total nitrogen (TN), phosphorus (P), chemical oxygen demand (COD), and biochemical oxygen demand (BOD) load across the wetland systems ranged between 3–27, 12–78, 0.1–23, 36–1130, and 11–281 g/m<sup>2</sup>day, respectively; mean removal percentages were 60–83, 74–84, 95–100, 94–98, and 93–97%, respectively, throughout the experimental run. The wetland systems achieved similar organics and P removals; operational and media variation did not influence removal kinetics. All wetland systems achieved the highest TN removal (76–87%) when subjected to 24-h flood period. TN removal performances of waste material–based wetlands were comparable to organic media-based systems. Tidal flow-based MFC wetlands achieved better TN removal than tidal flow wetlands because of supplementary electron production through fuel cell–based organics degradation kinetics. Maximum power production rates across the tidal flow-based MFC wetlands ranged between 53 and 57 mW/m<sup>2</sup>. Monod kinetics–based continuous stirred tank reactor (CSTR) models predicted NH<sub>3</sub>–N, TN, and COD removals (in wetland systems) more accurately. Kinetic models confirmed the influence of substrate (i.e., pollutant) and environmental parameters on pollutant removal routes.</p>

Research output information

Output type

Research output:
Contribution to journal
Article
Research
Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 30908-30928 (21 pages)

Journal (Volume, Issue Number)

Environmental Science and Pollution Research (Volume 28, Issue 24)

Publication milestones

  • Accepted/In press - 25/01/2021
  • Published - 16/02/2021

Publication status

Published - 16/02/2021

ISSN

0944-1344