Influence of instrument parameters on the electrochemical activity of 3D printed carbon thermoplastic electrodes
- Ricoveer Singh Shergill,
- ,
- Bhavik Anil Patel(corresponding author)
- School of Applied Sciences, Brighton, BN2 4GJ, UK; Centre for Stress and Age-Related Disease, Brighton, BN2 4GJ, UK,
- ,
- ,
Research output:
Contribution to journal
Article
Research
Peer-reviewOpen access
About the research
3D printing provides a reliable approach for the manufacture of carbon thermoplastic composite electrochemical sensors. Many studies have explored the impact of printing parameters on the electrochemical activity of carbon thermoplastic electrodes but limited is known about the influence of instrument parameters, which have been shown to alter the structure and mechanical strength of 3D printed thermoplastics. We explored the impact of extruder temperature, nozzle diameter and heated bed temperature on the electrochemical activity of carbon black/poly-lactic acid (CB/PLA) electrodes. Cyclic voltammetry and electrochemical impedance spectroscopy measurements were conducted using standard redox probes. The electrode surface and cross-section of the electrode was visualised using scanning electron microscopy. We found that using extruder temperatures of 230 °C and 240 °C improved the electrochemical activity of CB/PLA electrodes, due to an increase in surface roughness and a reduction in the number of voids in-between print layers. Nozzle diameter, heated bed temperature of different 3D printers did not impact the electrochemical activity of CB/PLA electrodes. However high-end printers provide improved batch reproducibility of electrodes. These findings highlight the key instrument parameters that need to be considered when manufacturing carbon thermoplastic composite electrochemical sensors when using 3D printing.
Documents and links
Final published version, 3.55 MB
License:CC BY, opens in new tab
Research output information
Output type
Research output:
Contribution to journal
Article
Research
Peer-reviewOriginal language
EnglishArticle number
339Journal (Volume, Issue Number)
Scientific Reports (Volume 13, Issue 1)Publication milestones
- Accepted/In press - 05/01/2023
- Published - 07/01/2023
Publication status
Published - 07/01/2023
