Skip to search boxSkip to navigationSkip to main content

Flow Characterization of a Pulsating Heat Pipe through the Wavelet Analysis of Pressure Signals

  • Roberta Perna
    ,
  • Mauro Abela
    ,
  • Mauro Mameli
    ,
  • Alessandro Mariotti
    ,
  • Luca Pietrasanta
    ,
  • Marco Marengo
Research output:
Contribution to journal
Article
Research
Peer-review

Open access

About the research

<p>Pulsating Heat Pipes are two phase passive heat transfer devices characterized by a thermally induced two phase oscillating flow. The correct detection of the dominant frequencies of such oscillations is fundamental to fully characterize the device thermofluidic operation but the studies available in the literature are very heterogenous and results are often discordant. In this work, the concept of dominant frequency in Pulsating Heat Pipes is thoroughly discussed and defined analytically. The wavelet transform is used to characterize the fluid pressure signal in the frequency domain varying the heat power input at the evaporator and in the condenser zone of a full-scale Pulsating Heat Pipe tested in microgravity conditions. During the slug-plug flow regime, the dominant frequencies falls in the range 0.6–0.9 Hz, showing an increasing trend with the heat load input. The Cross-Correlation reveals that the two signals at the evaporator and at the condenser are very similar. Finally, the instantaneous angle of phase is calculated and lies between 310 and 360 deg. This value can be physically interpreted as a repeatable time shift between the two signals that can be used to evaluate the flow local mean velocity (0.09–0.13 m/s) constituting a valuable alternative to the visualization techniques.</p>

Research output information

Output type

Research output:
Contribution to journal
Article
Research
Peer-review

Original language

English

Article number

115128

Journal (Volume, Issue Number)

Applied Thermal Engineering (Volume 171)

Publication milestones

  • Accepted/In press - 25/02/2020
  • Published - 27/02/2020

Publication status

Published - 27/02/2020

ISSN

1359-4311