Drop impact onto a cantilever beam: behavior of the lamella and force measurement
- Huanchen Chen,
- Xurui Zhang,
- Beatriz Defez Garcia,
- Anastasios Georgoulas,
- Marin Deflorin,
- Qingxia Liu
- York University Toronto,
- University of Alberta,
- Polytechnic University of Valencia,
- ,
- ,
- Southern University of Science and Technology
Research output:
Contribution to journal
Article
Research
Peer-reviewOpen access
About the research
<p>In this work, the process of drop impact onto an elastic surface (a cantilever beam) was studied. Different from previous studies which typically focused on the behavior of the elastic surface (e.g., deformation and oscillation), the focus of this work is to examine the behavior of the resulting lamella during the impact. It was found that the maximum contact diameter of the lamella in an elastic impact compared to impact onto a ridged surface is significantly smaller (e.g., 17% for impact at 2 m/s). The results were explained through an analysis of impact energy and the stored elastic energy in the beam. In this work, we also demonstrated how to use a cantilever beam to measure maximum drop impact force. It was found that a large natural frequency of the cantilever beam is needed for the maximum force measurement to produce acceptable values.</p>
Documents and links
Research output information
Output type
Research output:
Contribution to journal
Article
Research
Peer-reviewOriginal language
EnglishPages from-to (Number of pages)
Pages 85-96 (12 pages)Journal (Volume, Issue Number)
Interfacial Phenomena and Heat Transfer (Volume 7, Issue 1)Publication milestones
- Accepted/In press - 23/07/2019
- Published - 2019
Publication status
Published - 2019
