Skip to search boxSkip to navigationSkip to main content

Development of Cu-Modified PVC and PU for Catalytic Generation of Nitric Oxide

  • Liana Azizova
    ,
  • Santanu Ray
    ,
  • Sergey Mikhalovsky
    ,
  • Lyuba Mikhalovska
  • ANAMAD Ltd
Research output:
Contribution to journal
Article
Research
Peer-review

Open access

About the research

Nitric oxide (NO) generating surfaces are potentially promising for improving haemocompatibility of blood-contacting biomaterials. In the present report, Cu-modified poly(vinyl chloride) (PVC) and polyurethane (PU) were prepared via polydopamine (pDA)-assisted chelation. The copper content on the PVC and PU modified surfaces, assessed by inductively coupled plasma - optical emission spectrometry (ICP-OES), were about 3.86 and 6.04 nmol·cm−2, respectively. The Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) data suggest that copper is attached to the polymer surface through complex formation with pDA. The cumulative leaching of copper from modified PVC and PU during the five day incubation in phosphate buffered saline (PBS), measured by inductively coupled plasma mass spectrometry (ICP-MS), was about 50.7 ppb and 48 ppb, respectively which is within its physiological level. Modified polymers were tested for their ability to catalytically generate NO by decomposing of endogenous S-nitrosothiol (GSNO). The obtained data show that Cu-modified PVC and PU exhibited the capacity to generate physiological levels of NO which could be a foundation for developing new biocompatible materials with NO-based therapeutics.

Research output information

Output type

Research output:
Contribution to journal
Article
Research
Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 20-33 (13 pages)

Journal (Volume, Issue Number)

Colloids and Interfaces (Volume 3, Issue 1)

Publication milestones

  • Accepted/In press - 04/03/2019
  • Published - 09/03/2019

Publication status

Published - 09/03/2019

ISSN

2504-5377