Structural properties of mobile armors formed at different flow strengths in gravel-bed rivers

Mark Powell, Anne Ockelford, S.P. Rice, John Hillier, Thao Nguyen, Ian Reid, Nicholas Tate, David Ackerley

Research output: Contribution to journalArticle

Abstract

Differences in the structure of mobile armors formed at three different flow strengths have been investigated in a laboratory flume. The temporal evolution of the bed surfaces and the properties of the final beds were compared using metrics of surface grain size, microtopography, and bed organization at both grain and mesoscales. Measurements of the bed condition were obtained on nine occasions during each experiment to describe the temporal evolution of the beds. Structured mobile armors formed quickly in each experiment. At the grain scale (1-45 mm; 9 ≤ Ds50 ≤ 17 mm where Ds50 is the median surface particle size), surface complexity decreased and bed roughness increased in response to surface coarsening and the development of the mobile armor. Particles comprising the armor also became flow aligned and developed imbrication. At a larger scale (100-200 mm), the surface developed a mesoscale topography through the development of bed patches with lower and higher elevations. Metrics of mobile armor structure showed remarkable consistency over prolonged periods of near-constant transport, demonstrating for the first time that actively transporting surfaces maintain an equilibrium bed structure. Bed structuring was least developed in the experiments conducted at the lowest flow strength. However, little difference was observed in the structural metrics of the mobile armors generated at higher flows. Although the range of transport rates studied was limited, the results suggest that the structure of mobile armors is insensitive to the formative transport rate except when rates are low (τ* ≈ 0.03 where τ* is the dimensionless shear stress).
Original languageEnglish
Pages (from-to)1494-1515
JournalJournal of Geophysical Research: Earth Surface
Volume121
Issue number8
DOIs
Publication statusPublished - 26 Aug 2016

Fingerprint

river bed
gravel
temporal evolution
bed roughness
imbrication
microtopography
experiment
low flow
shear stress
grain size
particle size
topography
rate

Bibliographical note

© 2016. The Authors. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

Cite this

Powell, Mark ; Ockelford, Anne ; Rice, S.P. ; Hillier, John ; Nguyen, Thao ; Reid, Ian ; Tate, Nicholas ; Ackerley, David. / Structural properties of mobile armors formed at different flow strengths in gravel-bed rivers. In: Journal of Geophysical Research: Earth Surface. 2016 ; Vol. 121, No. 8. pp. 1494-1515.
@article{441960b9fe154326abcf9207ec1af66f,
title = "Structural properties of mobile armors formed at different flow strengths in gravel-bed rivers",
abstract = "Differences in the structure of mobile armors formed at three different flow strengths have been investigated in a laboratory flume. The temporal evolution of the bed surfaces and the properties of the final beds were compared using metrics of surface grain size, microtopography, and bed organization at both grain and mesoscales. Measurements of the bed condition were obtained on nine occasions during each experiment to describe the temporal evolution of the beds. Structured mobile armors formed quickly in each experiment. At the grain scale (1-45 mm; 9 ≤ Ds50 ≤ 17 mm where Ds50 is the median surface particle size), surface complexity decreased and bed roughness increased in response to surface coarsening and the development of the mobile armor. Particles comprising the armor also became flow aligned and developed imbrication. At a larger scale (100-200 mm), the surface developed a mesoscale topography through the development of bed patches with lower and higher elevations. Metrics of mobile armor structure showed remarkable consistency over prolonged periods of near-constant transport, demonstrating for the first time that actively transporting surfaces maintain an equilibrium bed structure. Bed structuring was least developed in the experiments conducted at the lowest flow strength. However, little difference was observed in the structural metrics of the mobile armors generated at higher flows. Although the range of transport rates studied was limited, the results suggest that the structure of mobile armors is insensitive to the formative transport rate except when rates are low (τ* ≈ 0.03 where τ* is the dimensionless shear stress).",
author = "Mark Powell and Anne Ockelford and S.P. Rice and John Hillier and Thao Nguyen and Ian Reid and Nicholas Tate and David Ackerley",
note = "{\circledC} 2016. The Authors. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.",
year = "2016",
month = "8",
day = "26",
doi = "10.1002/2015JF003794",
language = "English",
volume = "121",
pages = "1494--1515",
journal = "Journal of Geophysical Research: Earth Surface",
issn = "2169-9011",
number = "8",

}

Structural properties of mobile armors formed at different flow strengths in gravel-bed rivers. / Powell, Mark; Ockelford, Anne; Rice, S.P.; Hillier, John; Nguyen, Thao; Reid, Ian; Tate, Nicholas; Ackerley, David.

In: Journal of Geophysical Research: Earth Surface, Vol. 121, No. 8, 26.08.2016, p. 1494-1515.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Structural properties of mobile armors formed at different flow strengths in gravel-bed rivers

AU - Powell, Mark

AU - Ockelford, Anne

AU - Rice, S.P.

AU - Hillier, John

AU - Nguyen, Thao

AU - Reid, Ian

AU - Tate, Nicholas

AU - Ackerley, David

N1 - © 2016. The Authors. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

PY - 2016/8/26

Y1 - 2016/8/26

N2 - Differences in the structure of mobile armors formed at three different flow strengths have been investigated in a laboratory flume. The temporal evolution of the bed surfaces and the properties of the final beds were compared using metrics of surface grain size, microtopography, and bed organization at both grain and mesoscales. Measurements of the bed condition were obtained on nine occasions during each experiment to describe the temporal evolution of the beds. Structured mobile armors formed quickly in each experiment. At the grain scale (1-45 mm; 9 ≤ Ds50 ≤ 17 mm where Ds50 is the median surface particle size), surface complexity decreased and bed roughness increased in response to surface coarsening and the development of the mobile armor. Particles comprising the armor also became flow aligned and developed imbrication. At a larger scale (100-200 mm), the surface developed a mesoscale topography through the development of bed patches with lower and higher elevations. Metrics of mobile armor structure showed remarkable consistency over prolonged periods of near-constant transport, demonstrating for the first time that actively transporting surfaces maintain an equilibrium bed structure. Bed structuring was least developed in the experiments conducted at the lowest flow strength. However, little difference was observed in the structural metrics of the mobile armors generated at higher flows. Although the range of transport rates studied was limited, the results suggest that the structure of mobile armors is insensitive to the formative transport rate except when rates are low (τ* ≈ 0.03 where τ* is the dimensionless shear stress).

AB - Differences in the structure of mobile armors formed at three different flow strengths have been investigated in a laboratory flume. The temporal evolution of the bed surfaces and the properties of the final beds were compared using metrics of surface grain size, microtopography, and bed organization at both grain and mesoscales. Measurements of the bed condition were obtained on nine occasions during each experiment to describe the temporal evolution of the beds. Structured mobile armors formed quickly in each experiment. At the grain scale (1-45 mm; 9 ≤ Ds50 ≤ 17 mm where Ds50 is the median surface particle size), surface complexity decreased and bed roughness increased in response to surface coarsening and the development of the mobile armor. Particles comprising the armor also became flow aligned and developed imbrication. At a larger scale (100-200 mm), the surface developed a mesoscale topography through the development of bed patches with lower and higher elevations. Metrics of mobile armor structure showed remarkable consistency over prolonged periods of near-constant transport, demonstrating for the first time that actively transporting surfaces maintain an equilibrium bed structure. Bed structuring was least developed in the experiments conducted at the lowest flow strength. However, little difference was observed in the structural metrics of the mobile armors generated at higher flows. Although the range of transport rates studied was limited, the results suggest that the structure of mobile armors is insensitive to the formative transport rate except when rates are low (τ* ≈ 0.03 where τ* is the dimensionless shear stress).

U2 - 10.1002/2015JF003794

DO - 10.1002/2015JF003794

M3 - Article

VL - 121

SP - 1494

EP - 1515

JO - Journal of Geophysical Research: Earth Surface

JF - Journal of Geophysical Research: Earth Surface

SN - 2169-9011

IS - 8

ER -