Flexural behavior, porosity, and water absorption of CO₂-cured amorphous metallic-fiber-reinforced belite-rich cement composites

The present study aims to scrutinize the flexural behavior and engineering properties of beams reinforced with amorphous metallic fiber (AMF) at varying dosages (0%, 0.25%, 0.50%, and 0.75% AMF according to the volume of mortar) and lengths (5 mm, 10 mm, 15 mm, and 20 mm). A total of fourteen mortar mixes, i.e., seven mixes for water curing (immersed in fresh tap water) and seven mixes for carbonation curing (60% relative humidity, 20 °C, and 10% CO₂ concentration) were considered. The load–deflection behavior, flexural strength, pore structures, voids, and water absorption of the beams were investigated. The outcomes were justified with the mix containing 0.5% steel fiber (SF) and a length of approximately 20 mm. The results reveal that the load–deflection behavior and flexural strength were dramatically augmented for the beams with AMF as compared to the control beam (fiber-free beam), and the difference was more pronounced with an increase in both the dosage and the length of the AMF. Greater flexural strength with a lower deflection at failure was registered for the beam with AMF compared to that with SF. The voids and water absorption increased with an increase in the dosage and length of the AMF compared to the control specimen. It was also revealed that the carbonation-cured beams exhibited lower load–deflection behavior and lower flexural strength than those cured in water due to the substantially increased number of voids and greater water absorption driven by the better-connected pores. This study demonstrates that 0.50% AMF with a length of 20 mm can be used in cement-based materials due to the outstanding performance among all mixes.