Effect of Twisted Tapes on Swirling Flow Dynamics in Gas–Solid Two-Phase Flows for Natural Gas Hydrate Transportation

The discrete phase model (DPM) and the RNG k-ε turbulence model were employed to simulate the swirl flow behavior of hydrate transport in pipelines equipped with twisted tapes. The study analyzed the effects of various twisted tape parameters on the velocity field, turbulent dissipation, turbulent kinetic energy, and pressure distribution of hydrate particles. The results indicate that increasing the placement angle of the twisted tape enhances the tangential velocity near the pipe axis while reducing the axial velocity. Similarly, higher twisted tape configurations result in a further decrease in axial velocity. An increase in the number of twisted tapes leads to reductions in both tangential and axial velocities, and maximum speed increased by 18.2%. Larger placement angles of twisted tapes also intensify turbulence dissipation, with a more pronounced decay in turbulence intensity observed from the pipe wall to the axis. At section 8D, the turbulent kinetic energy increases by 60% with the increase in the height of the twisted tapes. Furthermore, as the number of twisted tapes increases, the disparity in turbulence strength between regions near the twisted tape and the pipe axis diminishes. The inner pipe pressure distribution is 360°/n rotation symmetrical distribution, and the twist tape is more, and the high pressure area is greater on the pipe section. The minimum pressure area is gradually close from the lee plane of the diversion strip to the position of the pipe axis. At section 65D, the pressure drop increases gradually with the increase in the orientation angle, and it increases by 36.8%.