A model for droplet heating and its implementation into ANSYS Fluent

Oyuna Rybdylova; Mansour Al Qubeissi; Markus Braun; Cyril Crua; Julien Luc Manin; Lyle M. Pickett; Guillaume De Sercey; Elena Sazhina; Sergei Sazhin; Morgan Heikal

doi:10.1016/j.icheatmasstransfer.2016.05.032

A model for droplet heating and its implementation into ANSYS Fluent

Oyuna Rybdylova, Mansour Al Qubeissi, Markus Braun, Cyril Crua, Julien Luc Manin, Lyle M. Pickett, Guillaume De Sercey, Elena Sazhina, Sergei Sazhin, Morgan Heikal

Research output: Contribution to journal › Article › peer-review

Abstract

The main ideas of the model for droplet heating and evaporation, based on the analytical solution to the heat conduction equation inside the droplet, and its implementation into ANSYS Fluent are described. The model is implemented into ANSYS Fluent using User-Defined Functions (UDF). The predictions of ANSYS Fluent with the new model are verified against the results predicted by in-house research code for an n-dodecane droplet heated and evaporated in hot air. Also, the predictions of this version of ANSYS Fluent are compared with in-house experimental data.

Original language	English
Pages (from-to)	265-270
Number of pages	6
Journal	International Communications in Heat and Mass Transfer
Volume	76
DOIs	https://doi.org/10.1016/j.icheatmasstransfer.2016.05.032
Publication status	Published - 26 May 2016

Bibliographical note

Keywords

Droplets
Heating
Evaporation
ANSYS Fluent
Diesel fuel
n-Dodecane

Access to Document

10.1016/j.icheatmasstransfer.2016.05.032Licence: Unspecified

Rybd_etal_2016.04.21.pdfAccepted author manuscript, 645 KBLicence: CC BY-NC-ND

Cyril Crua
- C.Cruabrighton.acuk
- School of Arch, Tech and Eng - Visiting Professor
- Advanced Engineering Centre
- Centre for Regenerative Medicine and Devices
Person: Visiting Scholar, Academic
Oyuna Rybdylova
- O.Rybdylovabrighton.acuk
- School of Arch, Tech and Eng - Principal Lecturer
- Centre for Precision Health and Translational Medicine
- Advanced Engineering Centre
Person: Academic
Sergei Sazhin
- S.Sazhinbrighton.acuk
- School of Arch, Tech and Eng - Professor of Thermal Physics
- Centre for Precision Health and Translational Medicine
- Advanced Engineering Centre
Person: Academic

Sandia National Laboratories CA
Cyril Crua (Visiting professor)
30 Jun 2014 → …
Activity: Visiting position › Visiting an external academic institution

Cite this

@article{1ff32700a9f4414093e2ff332a7f6882,

title = "A model for droplet heating and its implementation into ANSYS Fluent",

abstract = "The main ideas of the model for droplet heating and evaporation, based on the analytical solution to the heat conduction equation inside the droplet, and its implementation into ANSYS Fluent are described. The model is implemented into ANSYS Fluent using User-Defined Functions (UDF). The predictions of ANSYS Fluent with the new model are verified against the results predicted by in-house research code for an n-dodecane droplet heated and evaporated in hot air. Also, the predictions of this version of ANSYS Fluent are compared with in-house experimental data.",

keywords = "Droplets, Heating, Evaporation, ANSYS Fluent, Diesel fuel, n-Dodecane",

author = "Oyuna Rybdylova and {Al Qubeissi}, Mansour and Markus Braun and Cyril Crua and Manin, {Julien Luc} and Pickett, {Lyle M.} and {De Sercey}, Guillaume and Elena Sazhina and Sergei Sazhin and Morgan Heikal",

note = "{\textcopyright} 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/",

year = "2016",

month = may,

day = "26",

doi = "10.1016/j.icheatmasstransfer.2016.05.032",

language = "English",

volume = "76",

pages = "265--270",

journal = "International Communications in Heat and Mass Transfer",

issn = "0735-1933",

}

TY - JOUR

T1 - A model for droplet heating and its implementation into ANSYS Fluent

AU - Rybdylova, Oyuna

AU - Al Qubeissi, Mansour

AU - Braun, Markus

AU - Crua, Cyril

AU - Manin, Julien Luc

AU - Pickett, Lyle M.

AU - De Sercey, Guillaume

AU - Sazhina, Elena

AU - Sazhin, Sergei

AU - Heikal, Morgan

PY - 2016/5/26

Y1 - 2016/5/26

N2 - The main ideas of the model for droplet heating and evaporation, based on the analytical solution to the heat conduction equation inside the droplet, and its implementation into ANSYS Fluent are described. The model is implemented into ANSYS Fluent using User-Defined Functions (UDF). The predictions of ANSYS Fluent with the new model are verified against the results predicted by in-house research code for an n-dodecane droplet heated and evaporated in hot air. Also, the predictions of this version of ANSYS Fluent are compared with in-house experimental data.

AB - The main ideas of the model for droplet heating and evaporation, based on the analytical solution to the heat conduction equation inside the droplet, and its implementation into ANSYS Fluent are described. The model is implemented into ANSYS Fluent using User-Defined Functions (UDF). The predictions of ANSYS Fluent with the new model are verified against the results predicted by in-house research code for an n-dodecane droplet heated and evaporated in hot air. Also, the predictions of this version of ANSYS Fluent are compared with in-house experimental data.

KW - Droplets

KW - Heating

KW - Evaporation

KW - ANSYS Fluent

KW - Diesel fuel

KW - n-Dodecane

U2 - 10.1016/j.icheatmasstransfer.2016.05.032

DO - 10.1016/j.icheatmasstransfer.2016.05.032

M3 - Article

SN - 0735-1933

VL - 76

SP - 265

EP - 270

JO - International Communications in Heat and Mass Transfer

JF - International Communications in Heat and Mass Transfer

ER -

A model for droplet heating and its implementation into ANSYS Fluent

Abstract

Bibliographical note

Keywords

Access to Document

Fingerprint

Profiles

Cyril Crua

Oyuna Rybdylova

Sergei Sazhin

Activities

Sandia National Laboratories CA

Cite this